WHAT IS SAPONIFICATION?
Saponification is a process that converts fats, oils, or lipids (the acid) into soap by combining them with Sodium Hydroxide (the base). The chemical reaction relies on friction and self-generated heat. Through saponification, the acid and the base are neutralized. One of our favorite soap formulas is as follows: Combine organic olive oil, organic coconut oil, organic RSPO palm oil, and organic shea butter with sodium hydroxide. Knowing the proportions of acid to base needed for saponification is the key.
We determine this by knowing the SAP value of each oil (acid) in the formula (there are charts for this). The SAP value is the amount of sodium hydroxide needed to completely saponify a particular oil. Each type of oil whether vegetable or animal has a different SAP value based on its molecular structure.
Soap Saponification Section
Soap saponification section is a set of equipment that is used in this process. This saponification process can be of two types:
Batch type
Continuous process type
Batch Method
Semi-boiled saponification for obtaining medium-quality soap is attained by simple mixing and heating in a soap mixer, and it is used for producing small batches. Any impurities in the raw materials will be present in the final obtained soap, and there is no wasted discharge to drain.
Thoroughly boiled saponification for producing high-quality soap is done in kettles. This is the most common method of soap making and can be used to make laundry soap. These thoroughly boiled soaps are washed during the process to remove any glycerin or impurities.
Continuous Process
The continuous saponification process is suitable for producing different grades of soap of different quality standards. This system is not suitable for manufacturing soaps at a production rate of less than 50 tonnes of soap per day. The system can be designed to achieve soap production rates in excess of 200 tones per day.
In this technique, raw materials are accurately metered using a special pump to the saponification reactor. Following the reaction, the clean soap is separated from the product of the reaction which is rich in glycerin. The separation occurs in two stages:
1. In the rotating disk column
2. Through centrifuge separation
The clean soap is now can be pumped to the storage, or directly to the vacuum spray drying section.